Birmingham and Derby Junction Railway Totally Explained

Everything about The Birmingham And Derby Junction Railway totally explained

The Birmingham and Derby Junction Railway was a British railway company. From Birmingham it connected at Derby with the North Midland Railway and the Midland Counties Railway at what became known as the Tri Junct Station. It now forms part of the main route between the West Country and the Northeast.

Origins

Although Birmingham was served by an extensive canal network, indeed, it's suggested they were a factor in its growth as an engineering centres, there were huge technical problems.
   As early as 1824, Birmingham businessmen had been looking at the possibilities of the railway. The London and Birmingham Railway and the Grand Junction Railway had obtained their Acts of Parliament in 1833 and scheme for a line to Gloucester and Bristol was in the air.. The North Midland had been floated in 1833 and a proposal was made to connect to its terminus at Derby George Stephenson surveyed the route in 1835 bill envisaged the line as running through Whitacre to meet the London and Birmingham Railway with a junction at Stechford to travel into the latter's terminus at Curzon Street. It would also run from Whitacre to Hampton-in-Arden, where it would join the L&B for connections to London.
   The promoters came into conflict with those of the Midland Counties Railway even before the bills were presented to Parliament since the lines would compete with each other. In the end, the Birmingham and Derby line agreed to withdraw their branch to Hampton if it the Midland Counties withdrew their line along the Erewash valley.
   With the active support of Prime Minister Robert Peel, the member for Tamworth, the Birmingham and Derby Junction Railway Bill passed through Parliament on 19 May, 1836, The Hampton branch had been removed, but when the Midland Counties presented their bill, it still contained the Erewash line (although it was later dropped on the insistence of the North Midland Railway). The Birmingham and Derby people therefore presented a fresh bill in 1840 for the branch as a separate line which later became known as the Stonebridge Railway.

Construction

George's son Robert Stephenson took on the post of engineer, with an assistant, John Birkinshaw. Some 42 miles long, it would need seventy eight bridges and two viaducts, with a cutting at the approach to Derby, consideration being given to the danger of flooding by the River Trent and there was no gradient steeper than 1 in 339.
The rails were single parallel form, 56 lb. per yard, set in chairs upon cross sleepers. Although the standard gauge was used to match the other railways it was associated with, the rails were actually set at 4 ft. 9 inch apart to allow extra play.

History

Competition

The B&DJR opened on 12 August, 1839 with the line into Hampton, where the trains would reverse for Birmingham. There were six stations in addition to Hampton and Derby. These were Coleshill (later renamed Maxstoke), Kingsbury, Tamworth, Walton,Burton and Willington.
   From the start the joint use of Curzon Street terminus, with the London and Birmingham, gave problems. In 1842 a new line was opened with a new terminus at Lawley Street. This proceeded to Whitacre via Castle Bromwich, Water Orton and Forge Mills (later remamed Coleshill). The line from Whitacre to Stechford which hadn't been built, was abandoned, and that to Hampton was reduced to single track.
   Strong competition between the line and the Midland Counties Railway for transport, particularly of coal, to London, almost drove both of them out of business.
   The B&DJR offered a time from Derby to London of around seven hours, but when the MCR began operating it was able to make the journey in an hour less. The B&DJR lowered its fares but this simply resulted in a price war. In a war of "dirty tricks", the MCR made an agreement with the North Midland for exclusive access to its passengers. In retaliation the Birmingham board opposed a bill that the MCR had submitted to Parliament. Both lines were in dire straits and paying minuscule dividends.
   The North Midland was also suffering severe financial problems arising from the original cost of the line and its buiddings. At length George Hudson took control of the NMR and adopted Robert Stephenson's suggestion that the best outcome would be for the three lines to merge.
   Hudson foresaw that the directors of the MCR world resist the idea and made a secret agreement with the B&BJR for the NMR to take it over. This would of course take away the MCR's customers from Derby and the North and, when news leaked out, shares in the B&DJR rose dramatically.
   Hudson was able to give the MCR directors an ultimatum, and persuaded the line's shareholders to override their board and the stage was set for amalgamation.

Midland Railway

In 1844, the Birmingham and Derby Junction Railway, the Midland Counties and the North Midland Railway merged to form the new Midland Railway.
The route to Hampton-in-Arden, the Stonebridge Railway immediately lost all importance when the companies merged, since London traffic was redirected through the shorter Midland Counties route via Rugby. Known as the Stonebridge Railway, it became a minor branch line, and struggled on as such with only one daily passenger train until 1917, when this train was withdrawn as a wartime economy measure. The line remained open until 1935 for freight-only closing when one of the original timber bridges failed, thus becoming one of the earliest railway closures. The old Derby Junction station building at Hampton can still be seen.
The line into Lawley Street remained important, however, for passengers to the South West, who would join the Birmingham and Gloucester Railway at Camp Hill or, from 1841, Curzon Street.

Present day

It is now part of the main line from the North West and Newcastle, via Derby and Birmingham New Street, to the south West at Bristol. It now operated by Virgin Cross Country.
See also Birmingham and Derby Junction Railway LocomotivesFurther Information

Get more info on 'Birmingham And Derby Junction Railway'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://birmingham_and_derby_junction_railway.totallyexplained.com">Birmingham and Derby Junction Railway Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.